GW4-72.5 3 Phase 66kv 69kv 110kv 126kv Horizontal Disconnector Switch

1. GW4-72.5 126 type 3 phase 66kv 69kv 110kv 126kv outdoor horizontal disconnector switch

• High ability of anti-corrosion. All exposed steel parts are hot-dip galvanized; shaft pins are made of stainless steel; the surface of aluminium conductor is passivated; standard parts are hot-dip galvanized or made of stainless steel.
• Reliable and stable drive. Adapters on driving part consist of clamping forks or joint ball shaft; shaft base is in fully-enclosed structure; Three-phase ganged operation is rezlized through touching connection with universial friction.
• Good conductivity. Touch between outgoing pad contact piece and conductive rod is constructed by flexible connection; Outer-pressed stainless steel spring is used on contact piece; contacting part is silver-plated by finishing process.
• Good property of operating mechanism.

2. Normal Service Condition

• Altitude: not more than 1000m, and not more than 3000m in special condition.
• Ambient air temperature: -40ºC~45ºC
• Wind is not more than 35m/s (corresponding to wind pressure of 700Pa)
• Earthquake accelerate: horizontal 3.92m/s2
• Pollution class: III class(heavy pollution), IV class (in special circumstances)
• Iced coating: 20mm
• Max radiance from sun: 1000W/m2(fine weather, at noon)

Note: When product is used under the condition out of above range, user and manufacturer shall consult to confirm.

3. Technical Data Sheet

4. Installation Dimensions